After entering the winter, special care for the battery is necessary. The following teaches you the DIY method of battery maintenance. The battery is most afraid of low temperature, and the battery capacity in a low temperature environment is much lower than that at normal temperature. Therefore, the electrolyte height should be checked before the cold season. If necessary, replenish the electrolyte of the battery, adjust the specific gravity of the electrolyte, and check the storage condition, and charge if necessary. Proper use should also be accompanied by careful maintenance. The maintenance of the battery is not complicated, and you can do it yourself. In the first step, wipe the outside of the battery with a damp cloth, and wipe off the dirt, oil, white powder, etc. on the panel and the column head. Frequent scrubbing of the stigma of the battery, not only the white acid-etched powder will not accumulate on it, and the battery life will be longer than expected. In the second step, open the water cap of the battery and see if the water level is in the normal position. Generally, there will be upper and lower limit markings on the side of the battery for your reference. If the water level is found to be lower than the subscript line, distilled water must be added. The water should not be added too much. The standard is the most suitable for the middle of the upper and lower marking lines. PP PE Foam Sheet Board Production Line PP Sheet Extrusion Line,PP PE Foam Sheet Machine,PP PE Rigid Sheet Machine,PE Foam Sheet Extrusion Line WUXI HAOBANG MACHINERY MANUFACTURING CO.LTD , https://www.haobangmachinery.com