Precision CNC turning is a manufacturing process that involves the use of computer-controlled machines to create custom components and parts. The process involves the use of lathes, which are machines that rotate a workpiece while a cutting tool removes material from the surface of the part. The CNC (computer numerical control) aspect of the process allows for precise and repeatable cuts to be made, resulting in highly accurate parts. Precision CNC turning is used to create a wide range of parts, including those with complex geometries and tight tolerances. The process is often used in industries such as aerospace, automotive, medical, and electronics, where high-quality and precise components are essential.The advantages of precision CNC turning include the ability to produce parts with high accuracy and consistency, reduced waste and scrap, and increased efficiency and productivity. The process also allows for the creation of intricate and complex parts that would be difficult or impossible to produce using traditional machining methods.In summary, precision CNC turning is a highly advanced manufacturing process that utilizes computer-controlled machines to create custom parts with exceptional accuracy and precision. It is a critical process in many industries that require high-quality and precise components for their products. Precision Cnc Turning,Cnc Turned Components,Precision Turning Parts,Cnc Precision Turning Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.remgaral.com
Model
XB-OTS-50
XB-OTS-80
XB-OTS-150
XB-OTS-225
XB-OTS-408
Inner size WxHxD(cm)
36×40×35
40×50×40
50×60×50
60×75×50
80×85×60
External size WxHxD(cm)
138x180x155
150X190X160
190x200X195
210x220X205
225x250x220
Shock Temperature Range
-65°C~150°C
Heating up time
RT~200°C about 35min
Cooling down time
RT~-70°C about 90min
Temp recovery time/change time
≤5min / ≤10sec
Temp control accuracy/
±0.5°C / ±2.0°C
distribution accuracy
Inner materials
SUS 304# stainless steel plate for inner chamber, and stainless steel plate + spray painting for external chamber.
Insulation materials
High-temperature high-density amino acid ethyl ester foam insulator material.
Systems
P.I.D + S.S.R + Microcomputer balanced temperature control system.
Cooling systems
Semi-hermetic two-stage compressor (water-cooled) / hermetic two-stage compressor (air-cooled).
Safety devices
Fuse switch, high and low pressure protection switch, refrigerant pressure protection switch, failure warning system, and electronic siren.
Fitting
Outlook window (special purchase), upper and lower adjustable compartment two energized measured line hole, casters, level bracket.
Power
3 phase AC 380V 50HZ/60HZ
Controller
Tanwan TATO or TH900C
Compressor
Germany Bitzer Brand
Electrical system
Temperature humidity controller
South Korea TH-900C
Sensors
Chino Japan
Heating tube
Titanium tube (customized, no brand)
Overheat protector
Rainbow South Korea
Thermal relay
ABB Sweden
Breaker
ABB Sweden
Contactor
ABB Sweden
SSR
ANV Taiwan
Intermediate relay
Omron Japan
Time Relay
CKC Taiwan
Switch
FUJI Japan
Air Switch
ABB Sweden
Light
Philips
Refrigeration system
Compressor
TECUMSEH France
Evaporator
Yongqiang Taiwan
Oil separator
Ailoude Taiwan
Solenoid valve
Saginomiya Japan
Heat Exchanger
Danfoss Denmark
Check valve
Danfoss Denmark
Heat expansion valve
Danfoss Denmark
Drier-filter
Danfoss Denmark
Refrigeration oil
Emkarate Imported
Refrigerants
Honeywell USA R404a & R23
14. **FAQ:**
- Have you found the suitable test chamber?
- How to purchase a high-quality and accurate test chamber?
- Buying an expensive but low-quality test chamber can damage your reputation and lose customers.
This is Suki from Dongguan Xinbao Instrument Co., Ltd. in China. I can help you find the best solution. Please let me know your requirements and what product you need to test. I’ll provide the best suggestion for you.
Model NO.: XB-OTS-D
Certificate: CE, ISO, SGS
Test Temperature Range: -65°C to +150°C
RS 232 Interface: Connects to PC
Delivery Time: 20 Days After Receiving the Deposit
Refrigerant: Environmentally Friendly R23/R404A
Heating / Cooling Time: RT to 200°C in 35 minutes / RT to -70°C in 90 minutes
Controller: Programmable LCD Touch Screen
Low Temperature Shock Range: -40/-55/-65°C
Loading Method: Static Load
System: P.I.D + S.S.R + Microcomputer Control
Trademark: OTS
Transport Package: Resin Fiber & Strong Wooden Case
Specification: 800×850×600mm
Origin: China
HS Code: 90248000
Large Compact Thermal Shock Chambers for Lab Use
1. **Applicable Industries:**
These large compact thermal shock chambers are widely used in laboratories for testing electronic products and materials under extreme temperature conditions. They simulate rapid temperature changes to evaluate the performance of materials such as metals, plastics, rubber, and electronics. This helps manufacturers understand how their products will behave under harsh environmental conditions.
2. **Inner Size Selection**