Color Wrap Film for car body wrapping have gloss,matte, metallic,chrome, chameleon,diamond,holographic,brushed finish and all car color wraps with imported Ishland glue and diamond air channels with good stretchable,very good to install and last long time outside over 3-5 years.
1.Water Resistant and UV Protected.
1. Clean off any dust, dirt or wax or other things before installation.
2. Measure the amount of protective film needed for the part to be fixed.
3. There is a transparent protective film on the surface which must be peeled off before use.
4. With a hair dryer, let the film be flexible and reduce wrinkles.
5. Even though it is waterproof, it cannot be completely submerged in water.
6. After assembly, please leave the car under the sun within 48 hours or do not wash the car in the meantime. Do not let the car stickers touch the water after installation for 48 hours.
Matte Car Wrap,Car Wrap Film,Car Wrapping Film,Gloss Car Wrapping,Car Wrapping Vinyl Guangzhou Fuyulai Technology Co.,Ltd , https://www.fylfilm.com
Type
Honey-comb type, teeth or customized
Application
Spare parts for pellet mill, such as feed pellet mill, biomass pellet mill
Our roller shell is suitable for CPM, BULHER, MUYANG, and other pellet mills
**Features of FDSP Roller Shell**
1. Made from wear-resistant alloy material, processed with fine machining and heat treatment.
2. Crafted from bearing steel, offering high hardness, excellent wear resistance, and a long service life. Tooth depth and shape can be customized.
3. The tooth surface design enhances the pelleting performance.
4. Common tooth forms include honeycomb, scallop, and scallop with edge banding.
5. Honeycomb and scallop types are mainly used in livestock and poultry feed production.
6. Honeycomb roller shells ensure even wear on the ring die but may have weaker coil performance.
7. Scallop-shaped roller shells offer better coil performance and are widely used in feed mills, although they may cause uneven wear on the ring die.
8. Scallop with edge banding is ideal for aqua feed, preventing feed from sliding during extrusion.
We have a wide range of pellet mill parts in stock, ready for immediate delivery.
**Product Description:**
The roller shell, commonly known as the roller, is one of the key components in a pellet mill. It is used to process various types of biomass fuel granules, animal feed pellets, and more. Made from wear-resistant alloy steel with carburization heat treatment, it ensures uniform hardness and a long service life. It comes in different types, including through-tooth, non-through-tooth, and pass types. The inner eccentric shaft is precisely manufactured, allowing customers to adjust the space between the roller and ring die according to their production needs. It is easy to install and replace, making it a reliable choice for pellet mill operations.
**Product Photos:**
[Insert product images here]
**Important Notes:**
1. Choose the correct die hole compression ratio.
2. Adjust the working clearance between the ring die and roller (recommended range: 0.1–0.3 mm). After starting the new pellet mill, the roller should be in a pre-running state without rotating.
3. New ring dies should be paired with new rollers. Ensure that the roller is loose at the front and tight at the back. If sharp corners appear on both sides of the roller, use a hand grinder to blunt the flange part for better connection with the ring die.
4. Before feeding raw materials into the pellet mill, perform pre-cleaning and magnetic separation to minimize iron impurities entering the die holes. Regularly check the die holes for blockages and clean them as needed.
5. If plastic deformation occurs in the cone hole of the ring die’s guiding material, causing the hole to shrink, it must be repaired. During repair, ensure that the lowest height of the ring die’s inner surface is 2mm higher than the bottom of the overtravel groove. Additionally, the eccentric shaft adjustment should allow for extra space; otherwise, the ring die should be scraped.
2.Invisible Air-Release Channel, easily get rid of bubbles during installation.
3.Strong self adhesive, eliminate bubbles, peel and stick application.
4.Gloss and smooth finish.
5.Stretchable with heat.
6.Easy to clean with soap and water.
7.Long lasting for approximately 5 years indoor use and 3 years outdoor use.
8.It can also be applied onto most smooth painted or metalized surface such as cell phone, laptop, home appliances, table and even cabinet and much more.
Installation Tips
Roller Shell_Pellet Mill Roller Shells for Sale
Model NO.: FDSP
Separated: Yes
Brand: Fdsp
Name: Roller Shell – Pellet Mill Roller Shells for Sale
Application: For Ring Die Pellet Mill
Customized: CPM, Muyang, Bulher
Trademark: Liangyou
Transport Package: Iron Case
Specification: CE, ISO, SGS
Origin: Jiangsu, China
HS Code: 8436100000