Split System Heat Pump,Split Air Source Heat Pump,Split Heat Pump,Split Heat Pump With Tank Guangdong Shunde O.S.B. Environmental Technology CO.,LTD. , https://www.heatpump-osb.com
The “Portable Factory Truck Working Device Detection System†developed by the project team is mainly used for the inspection of the testing items such as the natural slippage, maximum lifting speed, and inclination angle change of the forklift working device. The device has strong versatility and high degree of automation. It has a simple structure and is easy to carry. It can realize one-key measurement and remote transmission of data. Compared with the existing inspection methods, it can improve the inspection accuracy and efficiency and reduce the labor intensity. The device has applied for a patent to the State Intellectual Property Office and has been successfully accepted.
Another instrument developed by the project is the “Calibration Measurement Instrument for Lift Lifting Device for Portable Elevatorsâ€, which is used for the calibration and verification of the effectiveness of lift overload protection devices. The main force component of this device is made of carbon fiber material. The whole structure is reasonable, light weight, simple operation, easy to carry, and can achieve continuous loading and detection. Compared with the standard weight inspection method, the inspection efficiency can be improved, the inspection cost can be reduced, and the labor intensity can be reduced. The project has been granted a national patent license in 2015 (patent number: ZL 2014 2 0470136.4). At present, the project has been completed by Fuzhou Xin Ao Turner Technology Co., Ltd. and has completed sales of nearly 40 units.
The acceptance experts agreed that both projects are innovative and practical, and the research results have reached the leading level of domestic similar products.
(Original title: Acceptance of the two AQSIQ science and technology projects undertaken by the Provincial Special Inspection Institute)
[China Instrument Network Instrument R&D] Recently, the Fujian Provincial Bureau of Quality Supervision presided over the development of a new technology development project of the General Administration of Development of the Ministry of Science and Technology under the supervision of the Special Inspection Institute of Fujian Province. (Project No. 2014QK023 ")" and "Research and development of portable elevator overload device calibration and measuring instrument (plan number 2015QK121)" acceptance meeting. The acceptance expert group heard relevant reports from the project team, reviewed the prototype demonstration and reviewed the relevant materials, questioned and discussed relevant issues, and the expert group unanimously agreed that the two projects passed the acceptance check.