The Stone Vacuum Lifter series product include mainly two kinds of type , one type was powered batteries ,it developed for stone block paving in outside where espcieally on squares and sidewalk, these Vacuum lifter usually use high-capacity Batteries to support the machine Moving -Lifing and Sucking . It's portable and efficient. Most of these application in the world , Workers need pave the heavy stone block by manual . The Cowest Stone Paving Equipment brings revolution in this application, one person handling can handling Max 200kg Stone block easily with the Stone Paving Equipment . Whatever the material of stone is . Even We can design the customerised Stone Vacuum lifter for you .
Another type of Stone Vacuum lifter used the compressed air power , it mainly appliance to Marble Panels process , Such as Marble Panels Cuting loading , manu-marble demould ect.
Some of mining or stone process factory need heavy load capicty Stone lifter to stack stone blocks , in this case we usally design the Stone lifter with three-phase power supply,and use higly flow vacuum Blower as Motor . It can lift Several tons weight of Stone. We have many years of experience to design the Stone Vacuum lifter for a lot of Kinds Stones applicance.
Stone Vacuum Lifter ,Vacuum Lifter For Stone Slabs,Granite Vacuum Lifter,Granite Lifter,Intelligen Stone Lifter Robot Guangdong Cowest Machinery Equipment Co.,ltd. , https://www.cowestmac.comTop Quality Conveyor Belt Metal Detector for Food
In the food production industry, metal contamination is one of the most critical issues that must be addressed to ensure product safety and consumer trust. Metals can enter the food chain at various stages of processing, often due to wear and tear of machinery or handling equipment. A high-quality conveyor belt metal detector plays a vital role in identifying and removing these contaminants before they reach the final product.
Metal detectors used in the food industry are designed to detect three main types of metallic contaminants: ferrous metals, non-ferrous metals, and stainless steel. Ferrous metals are both magnetic and conductive, making them easier to detect. Non-ferrous metals, although not magnetic, are good conductors and can also be detected with precision. Stainless steel, however, is more challenging due to its low conductivity and non-magnetic nature, especially when the product is wet or contains high levels of salt.
If other non-metallic contaminants such as glass, ceramics, or stones are present, an X-ray inspection system may be more effective than a metal detector alone.
The EJH-360 model is a top-of-the-line conveyor belt metal detector tailored for the food industry. It is equipped with advanced technology, including DSP (Digital Signal Processing) and FPGA (Field-Programmable Gate Array), ensuring high sensitivity and accuracy. The machine is built with 304 stainless steel for the detection chamber and 201 stainless steel for the frame, making it durable and suitable for harsh environments.
Key Features:
- Phase tracking function for stable high-sensitivity detection
- Product tracking function for automatic adjustment and compensation
- Auto-balanced calibration for long-lasting performance
- High-performance FPGA and single-chip design
- Supports over 52 products in the database
- IP66 dust and water-resistant rating
- Complies with FDA standards for direct inspection of unpackaged food
- Designed for long-term stability in high-vibration and high-interference environments
Specifications:
- Model No.: EJH-360
- Detection Opening/Aperture Size: 40X15cm, 40X18cm, 50X20cm, 50X25cm
- Item: Metal Detector for Food, Detector De Metales
- Grade: Food Grade Metal Detectors
- Technology: DSP, FPGA
- Capacity: 25 to 50kg packaged products
- Type: Ferrous/Non-Ferrous Detector, Needle Detector
- Overall Machine Size: 7174mm(L) x 900mm(W) x 1030mm(H)
- Height from Belt to Ground: 750+100 mm, Feet Adjustable
- Trademark: ANHUSHEN
- Transport Package: Polywood Case
- Specifications: HACCP, FDA, CE, ISO9001-2008
- Origin: Made in China
- HS Code: 8543709100
The EJH-360 conveyor belt metal detector offers multiple rejection systems, including stop-on-detect, pusher reject, and flap reject, depending on the weight of the product. It supports flow speeds of 25 m/min fixed or 10–40 m/min variable, and the conveyor direction can be adjusted based on the control panel position.
Material: 304 stainless steel for the detector, 201 stainless steel for the frame, PVC/PU white belt
Belt Length: 1500mm
Conveyor Height: 750mm + 100mm adjustable feet with wheels
Alarm System: Buzzer / Warning Lights
Language: English/Spanish
Power Supply: AC 110V/220V, 50/60Hz, Power: 90/120/200W
The detection window size can be customized according to your requirements, and the sensitivity is based on international metal bead standards, not the product itself.
Save
Save