Fluid Bed Dryer is designed to introduce the hot air stream at the base of the product container which is filled with the material. Induced draught is created by means of blower and fresh air is sucked in to the unit. The fresh air is heat by means of electrical heaters or steam or thermic fluid heaters. This hot air stream expands the bed of material at certain velocity & creating turbulence in the product. The phenomenon is known as fluidisation and offer conditions which are almost ideal for drying. Fluidisation produces full agitation of solid particles and since each particle gets surrounded by hot air, heat transfer is extremely high and uniform. The product is dried fast without appreciable loss of heat. Filter bags prevent particles escaping from the dryer. Fluid Bed Dryer,Fluidized Bed Dryer,Vertical Fluid Bed Dryer,Batch Type Fluid Bed Dryer Changzhou Bole Tech Co.,Ltd , https://www.boledrying.com
The ZHP-250E intelligent thermostatic shaking incubator is widely used in germiculture, fermentation, cross-breeding, biochemical reactions, and enzyme and cell culture research that require precise temperature and shaking frequency control. It is suitable for both dynamic and static cultures of microorganisms, cells, and various fungi.
Features:
Combines a thermostatic incubator and shaker into one unit, offering dual functionality in a single device;
Equipped with microcomputer control for accurate temperature and shaking frequency regulation, along with timing functions and an LCD display for real-time monitoring of temperature and speed;
Includes over-temperature, power failure, leakage, and sensor fault protection alarms for enhanced safety;
Uses imported compressors and circulating blowers with eco-friendly, freon-free refrigeration technology;
Features an AC brushless motor for long service life, stable speed control, and maintenance-free operation;
Designed with aesthetics in mind, including a viewing window, germproof stainless steel interior, and rounded corners for easy cleaning;
Equipped with a door switch that stops the shaking mechanism when the door is open and restarts it automatically when closed;
Includes a special speed control circuit to ensure smooth start-up and prevent liquid splashing during experiments;
Optional high-precision temperature alarm system that automatically cuts off power if the temperature exceeds limits, ensuring safe operation;
Features an upgraded LCD display, improved temperature accuracy, and enhanced protection features, along with optional RS-485 interface for data connection to printers or computers.
Technical Parameters
Model
Technical Index
Shaking Incubator (Single Layer)
ZHP-250 E
Volume
250L
Door Opening Method
Single Door
Power Supply
~220V 50Hz
Temperature Range
4–60°C
Temperature Resolution
0.1°C
Temperature Fluctuation
±0.5°C
Temperature Homogeneity
±0.5°C
Shaking Frequency
Single Layer: 40–280 rpm
Double Layer: 40–200 rpm
Shaking Mode
Cyclotron Shake
Power
800 W
Working Time
Continuous
Shaking Amplitude
20mm
Ambient Temperature
10–30°C
(mm) Rocking Plate Size
400×350 mm
(mm) Overall Dimensions
630×650×1790 mm
Timing Range
1–9999 min
Maximum Flask Clamp (Standard Configuration: Universal Spring Clip)
400×350 Rocking Plate (Single Layer):
1000ml – 4 pcs.
500ml – 9 pcs.
250ml – 14 pcs.
100ml – 30 pcs.
Remark
Note: "L" represents the temperature range RT+5–65°C.
ZHP-250E Intelligent Thermostatic Shaking Incubator
Applicable Range: