The smart license plate recognition system has been widely used by parking management users. The smart license plate recognition system for entrances and exits can be found everywhere in the city. The barrier is the most important hardware device in the smart license plate recognition system.
Daozha as a faithful guardian of the entrance and exit, its installation method and use method is also very important, so each installation must be strictly operated according to the standard, to ensure that the follow-up process will not cause major problems due to small causes, leading to Intelligent license plate recognition system equipment can not be used normally. Therefore, regarding the installation of the intelligent license plate recognition system barrier, we must pay attention to the following requirements:
First, the intelligent license plate recognition system before the barrier factory, has been configured according to the site requirements of the number of springs, and to adjust the torque balance, such as the site environment has changed, just re-adjust the balance can be, otherwise there will be overheating and reducer wear Excessive phenomena occur.
Second, the installation of intelligent license plate recognition system barriers, generally on the level of the concrete surface or on the safety of the island, if there is a slope must pay attention to the installation of the specification.
Third, the ground coil in the process of embedding can not be damaged, try to avoid joints, otherwise there will be smart license plate recognition system barriers can not normally up and down the gate and the car can not automatically drop the rod and other phenomena.
Fourth, the installation of smart license plate recognition system must be coordinated with the ground coil sense of good, the input and output of the coil and twist gate twisted together, and the shorter the distance the better, after the coil is connected with dry cement Seal the cement nest with the buried coil.
Fifth, the intelligent license plate recognition system barrier must be carefully checked after the line is connected. If the detection operation is abnormal, it is necessary to reinstall the barrier.
No matter what the product is in installation and use, it is necessary to pay attention to prevention. As long as the intelligent license plate recognition system barrier is installed and used as required, it can not only prolong the use of time, but also improve the service life of the barrier.
Amblechi is a parking lot management system manufacturer focusing on intelligent parking for 15 years. It is dedicated to the development, production, sales, installation and after-sales one-stop service of intelligent parking system to create a good parking environment for you.
Shoes and Boots Accessories
The basic equipment for leather Shoe Care includes: leather cleaning fluid, waterproof spray, two-color leather shoe oil, large and small two-color bristle dust cleaning brush, horse hair brush, shoe horn, flannelette, etc., as well as wrinkle rubber shoe brush and sandalwood specially designed for deerskin shoes, and sheepskin gloves used to wipe the dust on shoes without shedding hair and hurting the leather.
1. Insoles: These can provide additional cushioning and support for your feet, especially if you have flat feet or high arches.
2. Shoe trees: These can help maintain the shape of your shoes and prevent creasing by keeping them stretched out when not in use.
3. Shoe horns: These can help you put on your shoes without damaging the back of the shoe or crushing the heel.
4. Waterproofing spray: This can protect your shoes from water damage and stains.
5. Shoe Polish: This can help restore the color and shine of leather shoes and boots.
6. Shoe brushes: These can be used to remove dirt and debris from your shoes and boots before polishing.
7. Boot cuffs: These can add a stylish touch to your boots while also keeping your legs warm.
8. Boot straps: These can help keep your pants tucked into your boots and prevent them from riding up.
9. Heel grips: These can prevent your feet from slipping out of your shoes and also help reduce friction and blisters.
10. Shoe clips: These can be used to add a decorative touch to your shoes and can be easily removed or swapped out for a different look.
