Beginner drivers must put their minds on the road. They can post warning signs designated by the traffic police department with words of internships. Observe road conditions while driving and respond as soon as possible. In case of emergency, brake early and never operate. Improperly caused a car accident. Here, Xiao Bian has organized the top eight attentions for drivers on the road.

Note one: Remember to review your homework before you go on the road

The so-called review of homework means that novice drivers should remember to understand the functions of the main parts of the vehicle before driving on the road, to avoid sometimes being panic-stricken just because they were on the road, mistakenly using the brakes as a throttle, and making mistakes in the gears. The so-called main parts of the vehicle are nothing more than brakes, throttles, clutches (only with manual transmission), gears, and meter indications. The instrument indicator is mainly the oil lamp and the water temperature lamp. Other switch flags, such as left and right turn signals, wipers, and function keys inside and outside the loop, have to be kept in mind.

After familiarizing with the various function keys, we must adjust the rearview mirror and the seat amplitude. These are to make the driving vision clearer. Especially rearview mirrors, although many vehicles now have reversing images and blind spot detection systems, rearview mirrors are crucial for determining vehicle distance.

Note 2: "How many eyes are longer"

It is often said that if you are on the road, you must look at six ways. For beginners, we are not striving to seek stability in the fast-track. It takes a few minutes to pay attention to traffic conditions and it is crucial to ease your own tension. Therefore, when driving normally, novices should not only keep their eyes on the front, they should also shift their eyes slightly, observe the rearview mirror, the road surface, and the front and top of the vehicle with extra light, so that your central vision can be scanned up and down, left and right, and front and rear Direction, on the one hand to see the road marking lines and road barriers, on the other hand to see the next vehicle.

Note three: it is best to plan the route

The novices are just starting to get on the road and are not very familiar with the road conditions. To be foolproof, you can use the map software to plan a relatively smooth and easy-to-drive route in advance, and try to choose a wide road and follow the planned route. Let my heart be more. Of course, you can also simulate the possible situations in your mind, for example, if you suddenly emerge a pedestrian in front of you, what you should do in the first step is to do the second step and make yourself more prepared.

Matters needing attention four: Remember to hit the turn signal

It's hard to avoid being a little nervous at first hand, but remember to turn on the lights when changing lanes, and look at the rearview mirror to ensure that there is no vehicle at the rear to change lanes. Some newcomers often forget to change lanes with the turn signal, which can easily collide with other lane changing vehicles. After changing the road, remember to turn the turn signal back.

Note 5: Do not hesitate when driving

The newcomer is often very cautious, but cautious over his head is also not good, for example, some novices are always hesitant when they want to change lanes. They feel that they cannot find the opportunity. This situation is more likely to cause trouble to other vehicles. It is recommended that novices should be able to change course if they feel that they are not completely confident in their journey. If they must change, look at the situation of the front, rear, left and right vehicles, and then complete the lane change at one go. In the endless stream of traffic, it is sometimes necessary to be decisive.

Matters needing attention six: Remember mistakes do not panic

Sometimes, if you don’t see the right road sign and go the wrong way, don’t panic. Don’t panic, keep going wrong, and wait for the next intersection to look for opportunities to turn around and be the right way. If you panic and urgently stop or turn around, the consequences will be unthinkable...

Note seven: Remember to slow down when turning

The driving performance of high-speed turning of a car depends on factors such as the suspension, the tire, and the position of the center of gravity of the vehicle. Generally, cars are designed in accordance with people's routine driving conditions and relevant regulations, and are not used for drift. Therefore, the novices are still honest when making turns. Let's slow down slowly. When you turn, if you drive too fast you will judge the wrong direction. By then, you may rub to the side railing.

Note eight: remember to pull the handbrake

One easy step for beginners to forget is to pull the handbrake after parking. Pulling up the handbrake is to prevent the car from slipping, especially when going uphill or downhill. If the car is not pulled, sometimes the car slides down and hits the vehicle behind. Therefore, there are two steps to stop the formation of subconscious movements, one is to hang a neutral one is to pull the handbrake. In addition, be sure to put the brakes in the end after starting.

Cable Wire Cutter

Heavy Duty Wire Cutters, Wire Cable Cutter

cable cutter

cable wire cutter M132


This cutter with foot control hydraulic pump,
can cut off copper&aluminium cable wire with steel sheathed.


cable wire diameter should be below 132mm.


Measurement:200*200*600MM


Weight:30KGS.

wire cutting tools

Heavy Duty Wire Cutters, Wire Cable Cutter

TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , https://www.scrap-wire-stripper.com