SAN FRANCISCO, Aug. 23, 2022 — PRNewswire — Autodesk, Inc. (NASDAQ: ADSK) has announced the addition of Rami Rahim to its Board of Directors, effective immediately. Rahim, who currently serves as CEO of Juniper Networks, brings a wealth of experience in technology leadership and innovation to the board. With over two decades at Juniper, he has played a key role in shaping the company’s direction and growth, particularly in the development of secure, AI-driven networking solutions. Rahim joined Juniper in 1997 during its early days and steadily climbed the ranks, taking on various technical and leadership roles before becoming CEO in 2014. His tenure has been marked by a deep understanding of platform technologies, strategic vision, and a commitment to driving continuous innovation. “Rami is an exceptional leader with a strong track record of transforming companies through innovation and strategic thinking,” said Andrew Anagnost, CEO and president of Autodesk. “His insights into how businesses evolve and adapt will be a valuable asset to our board as we continue to push the boundaries of design and manufacturing.” Stacy Smith, chairman of Autodesk's Board, added, “We are excited to welcome Rami to the board. His extensive experience in the tech industry and his ability to lead through change make him a great fit for Autodesk.” Before becoming CEO, Rahim held several senior roles at Juniper, including Executive Vice President and General Manager of the Juniper Development and Innovation organization. He also led the Platform Systems Division and the Edge and Aggregation Business Unit, demonstrating his broad expertise across different areas of the company. Rahim holds a Bachelor of Science in electrical engineering from the University of Toronto and a Master of Science from Stanford University. He also completed an executive program at Stanford’s Graduate School of Business. With 20 U.S. patents to his name in networking technologies, he is recognized as a thought leader in the field and a member of the IEEE. Autodesk continues to expand its leadership team with professionals who bring diverse perspectives and deep industry knowledge. As the company pushes forward in the digital design and manufacturing space, the inclusion of leaders like Rami Rahim reinforces its commitment to innovation and excellence. For more information about Autodesk, visit autodesk.com or follow @autodesk on social media.

Cylinder

Excavator cylinder: The hydraulic cylinder is a linear actuator whose output force is proportional to the effective area of the piston and the pressure difference between both sides. ‍Its function is to convert hydraulic energy into mechanical energy. The input of the hydraulic cylinder is the flow and pressure of the fluid, and the output is the linear motion speed and force. The piston of the hydraulic cylinder can complete linear reciprocating motion, and the output linear displacement is limited. The hydraulic cylinder is an energy conversion device that converts hydraulic energy into mechanical energy for reciprocating linear motion. The hydraulic cylinder is basically composed of a cylinder tube and a cylinder head, a piston and a piston rod, a sealing device, a buffer device and an exhaust device.

Cylinder maintenance method:

One. The hydraulic oil should be replaced regularly during the use of the cylinder, and the system filter should be cleaned to ensure cleanliness and prolong its service life.
two. Each time the oil cylinder is used, it needs to be fully extended and retracted for 5 strokes and then run with load. Doing so can exhaust the air in the system and preheat the systems, which can effectively avoid the presence of air or water in the system and cause gas explosion (or scorch) in the cylinder body, which will damage the seals and cause leakage in the cylinder. Wait for failure.
three. Control the system temperature. Excessive oil temperature will reduce the service life of the seal. Long-term high oil temperature will cause permanent deformation of the seal or even complete failure.
four. Protect the outer surface of the piston rod to prevent bumps and scratches from damaging the seals. Frequently clean up the mud and sand on the dust ring of the cylinder dynamic seal and the exposed piston rod to prevent difficult-to-clean dirt sticking to the surface of the piston rod Into the inside of the cylinder, damage the piston, cylinder or seal.
Fives. Check the connections of the threads and bolts frequently, and tighten them immediately if they are loose.
six. Frequently lubricate the connecting parts to prevent corrosion or abnormal wear in the absence of oil.



SEM 50F, 650 Welding Cylinder
Liugong loaders ZL50CN, 855N, 856 Welding Cylinder,
SDLG 956L 952H 953 Carbon Fiber Steering Cylinder,
XCMG Steering Cylinder LW500KL ZL50GN,
Komatsu WA380, WA380-3, WA380-5, WA430-5 Steering Cylinder
DEGONG loader Hydraulic System
Foton Lovol Loader Hydraulic Cylinder
Lonking 855N loader Hydraulic Cylinder
XGMA 932 936 956 Loader Hydraulic Cylinder
Changlin Loader Hydraulic Cylinder
Shantui SL50W Custom hydraulic system
And we have more.

Welding Cylinder,Cylinder Of Sdlg Loader,Xcmg Loader Steering Cylinder,Wheel Loader Hydraulic Cylinder

Jinan Union Construction Machinery Co., Ltd. , https://www.tfloaderparts.com